GE Voluson S6 Basic User Manual page 283

9.4.2.4 Calculating a Cine
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
2. Use the [Start Image] and [End Image] control below the menu area to select the starting
point and endpoint desired. When you select the first image (either start image or end
image) the lines denoting the images will be linked, when you select the second image
the lines will be unlinked.
3. Press the [Max Range] button to set the start image and end image as far away from
each other as the size of the render box allowes.
4. Select the step size.
The increment defines the amount of rotation between adjoining 3D images.
5. Select the reference image by using trackball.
6. Start the calculation of the cine sequence.
During the calculation process the following menu is displayed.
Image after image of the sequence is calculated and stored in the cine memory.
After the calculation is finished the rotating cine sequence is displayed on the screen.
Volume Mode
9-65