GE Voluson S6 Basic User Manual page 71

Hide thumbs Also See for Voluson S6:

4.8.2 Current Patient Menu

Voluson® S6/S8 Basic User Manual

5433669-100 Revision 4

If the "End Exam Dialog" field in the System Setup is marked by a check mark, the "End

Exam" dialog will be displayed on the monitor before ending the current exam.

on page 13-15

1. Incomplete measurement exists:

Select No: Dialog window disappears (exit to previous operating state)

Select Yes: "End Exam" command is executed and the dialog window disappears.

2. No incomplete measurement exists:

Select No: Dialog window disappears (exit to previous operating state)

Select Yes: "End Exam" command is executed and the dialog window disappears.

Patient ID exists: Patient and measurement data are stored in the "Data manager" (all

temporary patient and measurement data are cleared).

No Patient ID exists: all temporary measurement data are cleared

All files will be compressed when ending a exam. The status of the compression is indicated

with a statusbar on the lower left user interface.

The "End Exam" command is also executed if the [End Exam] key/button is pressed again

while the dialog window is displayed.

If a DICOM Printer is configured to print by "End Exam" and the printing page is not full the

following message appears:

If "Don't display this message again" is set, the message box will not displayed and the

printout will be started without the warning.

Patient Menu

Operating the System

Show Quick Links

Chapters