GE Voluson S6 Basic User Manual page 169

7.6.1 MHDF Main Menu
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
M mode image. HDF Mode overlays color on the M mode trace using velocity and variance
color maps. The HDF Mode wedge overlays the 2D mode image and M mode timeline.
The description of MHDF mode is subdivided in two groups:
•
To use the MHDF mode: 'MTD Main Menu'
•
To adjust MHDF setting: 'MTD Sub Menu'
To use special utilities: 'Utilities'
[PD Mode] key + [M Mode] key (hard keys)
By pressing the [PD] control and the [M] control, the MHDF mode is switched on in the
preparation mode. The M-cursor with M-Color window appears on the active 2D image.
These hard keys are also the Gain control for the MHDF mode (only in scan mode);
more information see 'MHDF Operation' on page 7-18.
To start and use the MHDF mode:
18. To adjust the MHDF settings: For more information see 'MHDF Sub Menu' on page 7-
19.
The "MHDF Main" menu appears on the menu area. (scan mode)
on page 7-13
on page 7-15
on page 13-2 and 'Gray Map' on page 6-22
For more information see 'MHDF Operation' on page 7-
M Mode
For
7-17