GE Voluson S6 Basic User Manual page 589

Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
Define and switch between different network settings for all your work environments to further
improve Voluson© S6/S8's portability. The following settings are stored in a network profile:
•
All DICOM settings and configurations
•
Static IP address, gateway, network mask, DNS
•
Printer settings
•
Button configuration
•
Hospital name
•
Network-Drive mappings
Network profiles dialog
Click the Network Profiles button in the network tab of the system setup. The following dialog
box appears:
To start using network profiles, set the
dialog. The currenty used profile is displayed in the
Default Profile section click the checkbox next to the profile name which should be
In the
active from boot-up. If no default is set, the system requests the desired network profile
everytime after boot-up.
New button to set up a new profile. See below.
Click the
Click the Rename button to rename the highlighted network profile.
Switch to to change the currently active network settings to the ones stored in the
Click
highlighted network profile.
Delete to delete the highlighted network profile.
Click
OK to confirm changes or Cancel to abort the operation.
Click
How to set up network profiles
Utilities and System Setup
Use Network Profiles option in the upper section of the
Current Profile textbox.
13-43