Advertisement
11.2.5.22 To measure the Items One by One
11.2.5.23 HR (Heart Rate)
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
4.
The +
E
cursor appears on the screen. Move the cursor to the E point and press the right
or left trackball key to fix the mark.
5.
F
The +
cursor appears on the screen. Move the cursor to the F point and press the right
or left trackball key to fix the mark.
6.
The +
A
cursor appears on the screen. Move the cursor to the A point and press the right
or left trackball key to fix the mark.
7.
C
The +
cursor appears on the screen. Move the cursor to the C point and press the right
or left trackball key to fix the mark.
8.
The +
EPSS
cursor appears on the screen. Move the cursor to the EPSS point and press
the right or left trackball key to fix the mark.
D:
End of systolic, immediately before the opening of the Mitral Valve
E:
The anterial leaflet of the mitral valve opens, it peaks at E.
F:
Lowest point of the initial diastolic closing.
A:
In atrial systole, blood is propelled through the mitral orifice and the mitral leaflets
reopen. The peak of this phase of mitral valve motion is indicated as A.
C:
Complete closure occurs after the onset of the ventricular systole.
EPSS:
Distance between the Mitral Valve E point and the posterior edge of the
interventricular septum at the same point in time.
To measure the items such as D-E, EPSS, E-F Slope, A-C Interval:
1.
Press the [Calc] key on the control panel.
2.
Select [MV] and then select the appropriate item.
3.
Perform the measurements by using the trackball and the right or left trackball key.
To measure the Heart Rate in M Mode:
Measurements and Patient Worksheets (Reports)
11-73
Hide quick links:
Advertisement
Chapters
