GE Voluson S6 Basic User Manual page 167

Note
7.5.2.3 MTD Gain Control
7.5.2.4 Invert MTD
7.5.2.5 Velocity Range (PRF)
7.5.2.6 MTD Cineloop
7.5.3 MTD Sub Menu
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
•
'Display Size' on page 7-8
The [Freeze] key stops the 2D image and MTD mode trace.
By pressing the [Freeze] key again, the MTD-cursor appears on the active 2D image.
The adjustment of the Gain control determines the amount of amplification applied to the
received echoes. All received echoes are amplified with the same gain value regardless of the
scan depth.
Rotate the [M Mode] key/and or the [CF Mode] key to adjust the gain (brightness) of the
entire image.
Note: The [M] Gain function influences the M trace brightness only. Note: The [CF] Gain
function influences the color saturation only.
Remarks:
•
The current gain value is displayed on the screen [GN ...].
This function inverts the color display in the MTD mode image. The color of the color wedge
inverts around the baseline.
key unlit: MTD color display normal ↑ yellow, red ↓ blue, green
key lit: MTD color display inverted ↑ green, blue ↓ red, yellow
For more information see 'Velocity Range (PRF)' on page 8-40.
For more information see 'M Cineloop' on page 7-6.
The "MTD Main" menu has to be active.
Select the key [Sub MTD] key. The MTD Submenu appears.
M Mode
7-15