Advertisement
M3500B/M5500B Service Manual
Labels
The labels used on the M3500B/M5500B are divided into 3 groups: the Case
Label Set, the Branding Label Set, and the Speaker Label. Each set of labels
is one sheet containing all the included labels.
The labels are adhesive-backed, and replacing a label consists of peeling up
the old, cleaning the surface, and sticking down the new. See "Removing and
Replacing Labels" on page 4-22.
Not shown here are the labels for the Manual Door; they are available only as
part of the replacement Manual Door Assembly.
Label Descriptions
The following sections describe each of the label sets in more detail.
Case Label Set
The case label set includes most of the labels on the top and bottom case,
except those that vary with the brand under which the product is sold (Philips
or Laerdal), and those that vary with product options (pacing, SpO
includes:
AED Operation label
Printer key label
OFF / ON label
DANGER / WARNING / IPX4 label
Printer latch label (arrow)
Power Connector label
Patient Connector label
ECG/SpO
Connectors label
2
EJECT Data Card label
Blank yellow label
See "Case Label Locations" on page 4-20 for correct placement.
The Case Label Set is available in all the supported languages (see Table 5-12
on page 5-14 for part numbers).
Labels
). This set
2
4
4-19
Advertisement
