Advertisement
M3500B/M5500B Service Manual
The Language Support Tool
The Language Support Tool allows field service personnel to perform several
tasks: 1) to set the language of the Control PCA of the defibrillator; 2) to set
the default display contrast, 3) to enable the SpO
the serial number. These tasks need to be performed under the following cir-
cumstances:
The Control PCA has been replaced.
The Control PCA contains all the operating software, configured
for the installed hardware. It also contains the unit's serial number,
which was programmed in during manufacturing.
The new Control PCA must be programmed to recognize the
hardware installed in this unit, to contain that unit's
serial number, and to set the lanugage of the unit.
The unit has received an upgrade adding the SpO
The added hardware will not be automatically recognized. The
Control PCA must be programmed to recognize the new hardware
installed.
The unit's software is being updated.
Software upgrades are periodically released to resolve customer
issues. The Language Support tool enables you to load new software
onto the unit.
Using the Support Tool
1. Have unit power off, and have either a fresh battery installed or a Power
Module connected.
2. Insert the Support Tool data card into the unit.
3. Turn unit power on.
4. Follow the screen prompts.
Press Yes to continue.
a.
The message "Upgrade software found Proceed to Program?" is dis-
played.
Press Yes to set the unit's language. Do not press any keys or touch the
b.
unit until the process is complete.
Set the default display contrast level. This value is only used when
c.
the configuration is lost. During the normal use, the unit powers up
with the contrast level it was last set to.
Select whether SpO
d.
Program in the unit's serial number
e.
The Language Support Tool
option, and 4) to program in
2
hardware is installed or not as appropriate.
2
capability.
2
4-67
4
Advertisement
