Optional) Setting Wifi Parameters - Huawei NetCol8000-C070 User Manual

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
5.
----End
Follow-up Procedure
After a USB flash drive has been inserted into the controller USB port and
successfully identified, tap Export File under MIB File to export the MIB file to the
USB flash drive for the customer's use in accessing a third-party EMS.
shows successful file export.
Before using a USB flash drive, ensure that its data has been scanned by antivirus
software and is secure.
Figure 4-17 Exporting the MIB file successfully

4.5.5 (Optional) Setting WIFI Parameters

Prerequisites
After connecting the WIFI module of the USB interface to the USB port of the
smart cooling product main control module, WIFI Settings is enabled to be set.
Issue 02 (2020-08-30)
Figure 4-16 Setting SNMP trap parameters
Tap Submit under SNMP Trap.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning
Figure 4-17
105