B Base Dimensions - Huawei NetCol8000-C070 User Manual

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
You are advised to make the base using angle irons, square irons, or channel steel,
with a width of 50 mm and thickness of 4–5 mm.
The dotted lines in the figure show the area for fan lowering and bottom pipe and
cable routes. Avoid this area when preparing the base. Here the angle iron
preparation is used as an example.
●
●
●
●
●
The holes for bolts securing base and cabinet are 37.5 mm and 50 mm away from
the sides. If you cannot directly drill holes on the base for welding nuts, weld the
nuts onto L-shaped components or components with other shapes, and then
secure the components to the base.
Control the welding errors during the welding; otherwise, the base may be
unusable.
●
Issue 02 (2020-08-30)
If the angle iron is 50 mm wide, the base will block the holes for routing
water inlet and outlet pipes. You need to cut holes on the channel steel to
avoid the blockage.
If the angle iron is less than 50 mm wide or the 25 mm x 50 mm channel
steel (shorter side upwards) is used, the base will not block the holes for
routing water inlet and outlet pipes. You do not need to cut holes to avoid the
blockage.
If the angle iron is 72.5 mm wide or wider, the base will block the path for
lowering the fan and holes for routing cables and water inlet and outlet pipes.
You need to cut holes on the channel steel to avoid the blockage.
For a single-door cabinet: If the angle iron is wider than 50 mm, the base will
block the path for lowering the fan and holes for routing cables and water
inlet and outlet pipes. You need to cut holes on the channel steel to avoid the
blockage.
For a double-door or triple-door cabinet: If the angle iron width ranges from
50 mm to 72.5 mm, the base will block the holes for routing cables and water
inlet and outlet pipes. You need to cut holes on the channel steel to avoid the
blockage.
Upflow
Copyright © Huawei Technologies Co., Ltd.
B
Base Dimensions

B Base Dimensions

205