Correlation Relationship Of Parameters - Huawei NetCol8000-C070 User Manual

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Procedure
Step 1 On the home screen, choose Settings > Comm Settings > WIFI Settings.
Step 2 Set the parameters by referring to
Table 4-10 WiFi settings
Parameter
WiFi SSID
WiFi Password
Enable WiFi
Step 3 Tap Submit.
----End

4.5.6 Correlation Relationship of Parameters

When setting parameters, pay attention to the following relationships.
Alarm Parameters
●
●
●
●
●
●
●
●
●
●
Issue 02 (2020-08-30)
Setting Method
Set WiFi SSID based on the actual configuration; WiFi SSID
is the name used for the WiFi hotspot over which a mobile
phone can connect to the smart cooling product.
Enter the WiFi password when you use a mobile phone to
connect to the WiFi. When you enable the WiFi function for
the first time, you need to set a password (the WiFi has no
preset password).
Enable the WiFi function. The default status is Disable.
Power underfrequency alarm threshold < Power overfrequency alarm
threshold
Backup power underfrequency alarm threshold < Backup power
overfrequency alarm threshold
Supply air high temperature alarm threshold + 5°C ≤ Return air high
temperature alarm threshold
Supply air high temperature alarm threshold + 5°C ≤ Hot aisle high
temperature alarm threshold
Cold aisle high temperature alarm threshold + 5°C ≤ Hot aisle high
temperature alarm threshold
Cold aisle high temperature alarm threshold + 5°C ≤ Return air high
temperature alarm threshold
Supply air low temperature alarm threshold + 5°C ≤ Return air low
temperature alarm threshold
Supply air low temperature alarm threshold + 5°C ≤ Hot aisle low
temperature alarm threshold
Cold aisle low temperature alarm threshold + 5°C ≤ Hot aisle low temperature
alarm threshold
Cold aisle low temperature alarm threshold + 5°C ≤ Return air low
temperature alarm threshold
Copyright © Huawei Technologies Co., Ltd.
Table 4-10.
4 Commissioning
106