Which Parameters Are Restored To Default Values After Default Settings Are Operated - Huawei NetCol8000-C070 User Manual

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Procedure
Step 1 Tap Shutdown on the screen and wait for the system to shut down.
Step 2 Press the SW button on the main control module for at least 10s.
Step 3 The LCD displays a dialog box asking you to confirm the operation of restoring
factory settings.
●
●
Step 4 After the restart completes, the LCD displays the setup wizard screen for setting
parameters.
----End
7.1.15 Which Parameters Are Restored to Default Values After
Default Settings Are Operated
After choosing Settings > Restore Defaults > Comfirm, the following parameters
are displayed:
●
●
●
●
●
●
To prevent key data from being lost, you are recommended to record all
parameter values or back up data with export configurations before restoring
defaults. Then change the parameter values back to the recorded values after
restoring defaults. For details about how to use export configurations, see
Exporting
Issue 02 (2020-08-30)
To continue restoring factory settings, tap Yes, go on the next step.
Otherwise, tap No.
NO TE
If you do not confirm the operation within 30s, the dialog box disappears, and the
process of restoring factory settings is terminated.
NO TE
After the system is restored to factory settings, the user password is also reset to the preset
password, and must be promptly modified to ensure information security and normal
system running.
All parameters displayed on Settings > System Settings.
All parameters displayed on Settings > Alarm Settings.
All parameters displayed on Settings > Comm Settings.
All parameters except for language and time settings displayed on Settings >
Quick Settings.
Date format and time zone settings displayed on Settings > User Settings.
All parameters displayed on Maint > Sensor Calibration.
NO TICE
Data.
NO TE
After default settings are restored, all communication addresses are changed to 1 and the
communication between all devices and the EMS is disconnected. The communication
addresses must be reset to recover the communication.
Copyright © Huawei Technologies Co., Ltd.
7 FAQ
7.1.17
192