Huawei NetCol8000-C070 User Manual page 89

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Table 4-2 Parameter description
Menu
Select
Languag
e
Date &
Time
Settings
Teamwor
k
Settings
Issue 02 (2020-08-30)
Paramete Description
r
/ Choose language of the
ACC
Date Specifies the date display
format format for the ACC.
Date Specifies the date
settings displayed on the ACC.
Time zone Specifies the time zone
displayed on the ACC.
Time Specifies the time
displayed on the ACC.
Teamwork Set the assigned
group No. teamwork control
number.
Air Set the assigned smart
conditione cooling product address.
r address
Teamwork Disable or enable the
function teamwork function. If the
teamwork function is
disabled, this device is
operating according to its
own control. If the
teamwork function is
enabled, this device
works in harmony with
others that in the same
group.
Networkin Networking mode for the
g mode teamwork. The
networking mode set on
the screen must be
consistent with the actual
networking mode.
Otherwise, the teamwork
control function will be
unavailable.
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning
Configuration Principle
Set the parameter
according to the actual
situation.
Set the parameter
according to reading
habits.
Set the parameter
according to the actual
situation.
Set the parameter
according to the actual
situation.
Set the parameter
according to the actual
situation.
The number of the
teamwork controlled
group, which is the same
for all the devices in the
group.
Air conditioner addresses
should be different from
each other.
Set this parameter based
on the onsite device heat
distribution.
Networked over CAN or
MAC_CAN. CAN network
indicates teamwork control
over a CAN bus, MAC_CAN
network teamwork control
over an FE port.
81