Querying Logs; Querying Component Status - Huawei NetCol8000-C070 User Manual

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
----End

7.1.2 Querying Logs

Context
The Query Logs screen displays the operations performed by the user.
Procedure
Step 1 On the home screen, choose Maint > Query Logs.
----End

7.1.3 Querying Component Status

Context
You can query component status in the following two ways.
●
●
Procedure
●
●
----End
Issue 02 (2020-08-30)
NO TE
● The temperature curve (upper) and the humidity curve (lower) are displayed on the
same screen. The abscissa shows time. The temperature set point is the midpoint
temperature on the upper ordinate while the humidity set point is the midpoint
humidity on the lower ordinate.
● The temperature and humidity curves show the current average temperature and
humidity of the control type.
● You can tap and
ordinate. The midpoint temperature is the temperature set point and the midpoint
humidity is the humidity set point after the ordinate range is zoomed in or out.
● You can view the temperatures from (temp set point – 3°C) to (temp set point + 3°C) at
least and from (temp set point – 30°C) to (temp set point + 30°C) at most.
● You can view the humidity from (humidity set point – 5%) to (humidity set point + 5%)
at least, and from (humidity set point – 50%) to (humidity set point + 50%) at most.
Specific humidity fluctuation range displayed varies according to different models of
smart cooling products.
Enter the Status Summary screen. The control or running status of major
components such as the indoor fan and so on are displayed.
Enter the Device Details screen and then enter the menu of a specific
component. All parameters for the component are displayed.
When viewing the component status through Status Summary, choose
Common Function > Status Summary or Running > Status Summary on
the home screen. The general component status screen is displayed.
When querying component status through Device Details (using the T/H
sensor as an example), choose Running > Device Details > T/H Sensor on
the home screen to query the status of the T/H Sensor.
Copyright © Huawei Technologies Co., Ltd.
to zoom in or out the range of the temperature and humidity
7 FAQ
183