NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Menu
Comm
Settings
----End
4.3 Home Screen
You can tap the menu items, buttons, or icons on the screen to enter related
screens or perform operations, such as Running, Alarms and Settings. The
controller main screen is shown in
User interfaces displayed in this document are for reference only.
Issue 02 (2020-08-30)
Paramete
r
Return air
snesor 2
Return air
snesor 3
Return air
snesor 4
Cold aisle
sensor 1
Cold aisle
sensor 2
Cold aisle
sensor 3
Hot aisle
sensor 1
Hot aisle
sensor 2
Hot aisle
sensor 3
Modbus
Comm
address
NO TICE
Copyright © Huawei Technologies Co., Ltd.
Description
The return air sensors can
be set to Enable or
Disable.
The sensors in cold aisles
can be set to Enable or
Disable.
The sensors in hot aisles
can be set to Enable or
Disable.
Set the communication
address of the smart
cooling product as
planned. The EMS
communicates with the
smart cooling product
through this address.
Figure
4-3.
4 Commissioning
Configuration Principle
Disable
The cold aisle sensors
outside the cabinet need to
be enabled when they are
installed.
The hot aisle sensors
outside the cabinet need to
be enabled when they are
installed.
The communication
addresses of two smart
cooling products
connecting to the same
EMS must be unique.
85