Use Of On/Off Button; Enable 1-Bit Communication Object "Disable - ABB IP Touch 7 Manual

2.13.11 Use of ON/OFF button

Options:
– Deactivated: No ON/OFF button is enabled. No additional parameters available.
– Activated: The ON/OFF button is enabled. The following supplementary parameter is
available:
Object type ON/OFF button:
Options:
The parameter is used to specify the size of the communication object for sending
telegrams.
– 1 bit: Commands of an ON/OFF button are sent with 1 bit (0 or 1). The following
supplementary parameters are available:
Value for ON:
Options:
The parameter is used to send the command for "ON" with "0" or "1".
Value for OFF:
Options:
The parameter is used to send the command for "OFF" with "0" or "1".
- 1-byte value [0 - 255]: The value of an ON/OFF button is sent as 1-byte value without a
sign. The following supplementary parameters are available:
Value for ON:
Options:
The parameter is used to send the value for "ON" as absolute value.
Value for OFF:
Options:
The parameter is used to send the value for "OFF" as absolute value.

2.13.12 Enable 1-bit communication object "Disable"

Options:
There is the option of temporarily disabling the function via an additional communication object
"Disable".
Product manual 2CKA001473B5023
Control elements and application parameter
Deactivated
Activated
1 bit
1-byte value [0 - 255]
0
1
0
1
Setting option from 0 - 255
Setting option from 0 - 255
Deactivated
Activated
Control element "Audio control"
│114