ABB IP Touch 7 Manual page 198

Fan switch (basic version)
Fan switches (step switches) can be used to implement switching sequences. A step switch, so
to speak, combines several push-buttons into one control element.
Control element
Fan switch (step switch)
Value display elements / value sending elements (basic version)
– Value display elements are used to display values as text or graphic information. They
cannot be operated (exception is the value slider), but serve for the display of values.
– Value sending elements can be used to display values in different formats and to send them
to other devices.
Control element
Value or status display
Graphics display
Value sending element
(value slider)
Product manual 2CKA001473B5023
Status
Status
Function
The version has two buttons left and right for
calling up the next or previous step and a button
in the middle.
By pressing the right/left button several times,
one reaches a further step higher or lower.
The button in the middle returns the step switch
to the bottom step (= "Off").
The icon in the middle can be animated during
adjusting.
It is also possible to display the steps.
Function
The "Value or status display" version can display
values and texts which are sent from a
temperature sensor for example.
There are no direct control elements here!
The "Graphics display" version can display
values graphically, which are sent from a
temperature sensor. The values are also
displayed as a number.
With graphic display elements you can also
choose between a wind rose and a round
instrument. This must have been allocated
correspondingly in the commissioning software
of the IP touch.
There are no direct control elements here!
Value sending elements can be used to display
values in different formats and to send them to
other devices.
With the "Value slider" the slider can be used to
change values. The changed values are then
sent.
Text displays can be made here.
In this case, a corresponding text can be
displayed at the different slider positions.
Operation
│198