Inserting The Micro Sd Card (Sdhc); System Settings - ABB IP Touch 7 Manual

4.6

Inserting the micro SD card (SDHC)

Fig. 26: Inserting the micro SD card (SDHC)
Note
For the transfer of data to the device via the micro SD card both power supplies
must be switched on!
4.7

System settings

Fig. 27: System settings
The system settings are called up as follows:
1. Swipe to the right on the main operating page (homepage).
– The application page with applications and system settings opens.
2. Tap on "System".
Product manual 2CKA001473B5023
Operation
│218