Update; Transfer Of Pid File (Configuration File) - ABB IP Touch 7 Manual

5

Update

5.1

Transfer of PID file (Configuration file)

The image file can be transferred to a micro SD card, see chapter 1.13.2 "Export" on page 45.
This micro SD card can be inserted into the panel and the data are transferred to the IP touch.
Notice
The micro SD card must be formatted with FAT32 before use.
1. Transfer the PID file to the micro SD card.
Notice
If necessary, use an adapter for the micro SD card to transfer the data from the
PC to the card.
2. Insert the micro SD card into the device.
– An icon will be displayed on the status bar if the SD card is inserted successfully.
3. In the menu "System settings" tap the option "About".
4. Then tap the button "Firmware update".
5. Select the PID file and confirm by tapping "OK".
– The firmware update is applied.
Product manual 2CKA001473B5023
Update
│221