Fault And Alarm Messages - ABB IP Touch 7 Manual

4.5.2

Fault and alarm messages

The Busch-SmartTouch
Message contacts, sensors and their functionality can be monitored. The messages desired in
case of a fault or an alarm can be set individually (see chapter 4.6 "Inserting the micro SD card
(SDHC)" on page 218).
Note
Depending on the parameterization, only certain functions are available in the
application.
This allows the user to see via the "Fault and alarm messages" which messages have appeared
in the Busch-SmartTouch
delete the messages.
The "Fault and alarm messages" application is called up as follows:
1. Swipe to the right on the main operating page (homepage).
– The application page with applications and system settings opens.
2. Tap on "Alarm".
Here the current and archived messages (notifications) can be displayed and edited.
Confirming and archiving messages (notifications):
1. Tap on the pen icon.
2. Then tap on a message in the list.
– The message can now be confirmed.
– Depending on the parameterization, the message is now automatically archived or it can
be archived manually.
Product manual 2CKA001473B5023
® 7'' offers protection and information during malfunctions or faults.
®
7''. This application can also be used to acknowledge, export and
Operation
│211