Sound For Notice; Signal Tone For Error; Default Setting For Signal Tone Volume [%] - ABB IP Touch 7 Manual

2.15.6

Sound for Notice

Options:
The parameter is used to specify which signal tone is to be played during the display of the
message. Five different signal tones are available for selection.
2.15.7

Signal tone for error

Options:
The parameter is used to specify which signal tone is to be played during the display of the
message. Five different signal tones are available for selection.
2.15.8

Default setting for signal tone volume [%]

Options:
The volume of the signal tones is preset in percent via the parameter.
Product manual 2CKA001473B5023
Control elements and application parameter
Application "Fault and alarm messages" - Global settings
Setting option from 1 - 5
Setting option from 1 - 5
Setting option from 10 - 100
│118