Type Of Colour/White Lamp - ABB IP Touch 7 Manual

2.5.4

Type of colour/white lamp

Options:
The parameter is used to specify how the colour activation is to be controlled. Corresponding
sliders will be displayed in the control element. The type of colour control depends on the type
of lamp. Specific settings can be made for the lamps. For example, the colours can be changed
or the warm-white component can be adjusted.
– RGB: Used for RGB lamp. The following supplementary parameter is available:
Switching On/Off via:
Options:
The parameter is used to specify the On/Off control.
– Switch object: Setting, when the lamp contains a "Switch" object. The following
supplementary parameters are available:
Switched On -> preset value:
Options:
– Deactivated: No presets are sent when the lamp is switched on.
– Activated: The stored presets are sent when the lamp is switched on.
Switched Off -> RGB value 0,0,0:
Options:
– Deactivated: No RGB values are sent when the lamp is switched off.
– Activated: The RGB values (0,0,0) are sent when the lamp is switched off. This
parameter is important for lamps that do not contain a "Switch" object.
– RGB feedback: Setting when the lamp contains no "Switch" object but is switched off via
the RGB values.
– RGB+W: Used for RGB lamp with integrated white component. The following
supplementary parameters are available:
Switching On/Off via:
Options:
The parameter is used to specify the On/Off control.
– 1 Object: Setting when the lamp has only one channel (e.g. Philips Hue).
– 2 Objects: Setting when the lamp has several channels (RGB and White separated, e.g.
two stripes), separate ON/OFF switching via data points.
Product manual 2CKA001473B5023
Control elements and application parameter
Operation of "RGBW" control element"
RGB
RGB+W
RGB+WW/CW
WW/CW
Switch object
RGB feedback signal
Deactivated
Activated
Deactivated
Activated
1 object
2 objects
│69