ABB IP Touch 7 Manual page 30

Commissioning of the KNX Function via DCA (from ETS5)
Parameterising control elements
1. Open the "Navigation" tab in the library area.
2. Select a start or operating page in the tree structure.
– The page is displayed in the work area.
3. Pull a control element into the page view from the "Control elements" area via drag and
drop.
4. Select the control element in the page view.
– The control element is marked with a red frame.
5. Make the parameter settings in the "Parameter" area for the selected control element.
Notice
Entries in text fields must be confirmed with the return key.
The control elements are described in the following sections. For the description of the
respective control elements see chapter 2 "Control elements and application parameter" on
page 46
Product manual 2CKA001473B5023
Notice
The marking with a red frame also applies to available control elements that
are to be parameterised subsequently.
│30