Special Functions; Editing - ABB IP Touch 7 Manual

4.3

Special functions

4.3.1

Editing

The "Edit" function can only be called up via the main operating page and the operating pages.
1. It is opened via this icon.
Fig. 11: Edit icon
– Next to each control element a heart icon (take-up into the favourites list) and a time
program icon (take-up into the time program) is displayed.
Take-up into the favourites list:
1. Tap on a heart icon next to a control element which is to be taken up into the favourites list.
2. The heart icon now appears filled in, which means that the control element has been taken
up into the favourites list.
Take-up into time programs:
1. Tap on a time program icon next to a control element which is to become part of a time
program.
– The window "Create new timer" opens.
2. Specify weekdays during which the function of the control element is to be carried out. To
do this, tap on the days.
– A renewed tap removes the day!
3. Specify the starting time. Use the scrolling element for this.
– An end time can be additionally activated. For this the time can also be set via the
scrolling element.
4. Activate the astro function (option).
– This function can be used, for example, to automatically raise or lower the blinds a few
minutes earlier or later depending on the time of year.
– The disabling function "Not before" and "Not after" fixes disabling times before or after which
no functions are carried out. For this the time can also be set via the scrolling element.
Note
The correct coordinates of the device location must be set. The coordinates are
entered via the system settings of the commissioning software (DCA).
5. Tap on "Create".
– The time program is then taken up into the time program list and can be edited there.
(see chapter 4.5.3 "Time programs" on page 214).
6. Finally tap on "OK".
– A time program icon appears next to the control element with a digit (number of created
time programs with this control element).
7. The "Edit" function can be closed by tapping on the tick in the top bar.
Product manual 2CKA001473B5023
Operation
│201