Activating Mute (Mite Timer); Switching Light - ABB IP Touch 7 Manual

4.4.3

Activating mute (mite timer)

1. The function is called up via the bell button.
Fig. 21: Bell button
For mute activation (mute timer) the following functions are available.
Function
No call is pending:
"Mute" button (bell icon) is actuated.
■
– The ring tone of the panel is deactivated for a certain time. This is also indicated as icon
in the bottom bar.
– If calls are received during this time, only the video image is displayed.
– Missed calls are recorded in the events and image storage.
– The presets for this can be adjusted.
A call is pending, a speech connection is activated.
"Mute" button (microphone icon) is actuated.
■
– The microphone of the device is switched off until the bell is pressed again.
Note
The mute timer (settings) can also be called up via the push-button (bell icon) in
the bottom bar.
4.4.4

Switching light

1. The function is called up via the lamp button.
Fig. 22: Lamp button
Actuating the light switch makes the following function available:
Function
"Switching light" button actuated.
■
– The "White lamp" icon is displayed.
– The lamp of the outdoor station is switched.
Product manual 2CKA001473B5023
Operation
│207