One-Family House With Door Communication And Knx, Including Single Residential Unit - ABB IP Touch 7 Manual

6.3.3

One-family house with door communication and KNX, including single residential unit

One outdoor station is installed for the building entrance.
In this type of installation, the Master IP touch also fulfils the function of an IP gateway.
The KNX IP interface forms the interface between the local unit network and the KNX
installations and operates according to the KNXnet/IP specification.
Fig. 30: Overview: one-family house with door communication, KNX and single residential unit
Pos. Description
Door communication and KNX within the flat.
Use of a common PoE switch.
1 Static IP address assignment for KNX IP interface via ETS.
Static IP address assignment for the interface LAN2.
An Internet connection is required for the use of ABB-Welcome
Door communication and KNX within the flat.
Use of a router (the IP addresses are assigned by the router).
2
The assignment of fixed DHCP addresses is recommended.
[A] Welcome IP door communication
[B] Private area
For further information on IP address assignment, see see chapter 6.2 "Basic information" on
page 223.
Product manual 2CKA001473B5023
A A
P E o
Case studies
B B
2
KNX TP
KNX TP
1
P E o
® App.
│227