Type Of Display Element - Status Display - Size Of The Button; Type Of Display Element - Status Display - Object Type - ABB IP Touch 7 Manual

– Rain: The rain values of an allocated element are displayed.
– Twilight: The twilight values of an allocated element are displayed.
– Brightness: The brightness values of an allocated element are displayed.
– CO : The carbon dioxide values of an allocated element are displayed.
2
– Moisture: The moisture values of an allocated element are displayed.
– Air pressure: The air pressure values of an allocated element are displayed.
Notice
Supplementary parameters are available for all options. The parameters that
are displayed depends on the setting of the "Type of display element"
parameter.
2.10.4 Type of display element — Status display — Size of the button
Options:
The parameter is used to specify whether the display element occupies one column (one button
or control frame) or two columns (two buttons or control frames).
2.10.5 Type of display element — Status display — Object type
Options:
Parameter "Object type" is used to specify the size of the communication object.
– 1 bit: Status commands are sent with 1 bit (0 or 1). The following supplementary parameters
are available:
Text for value 0:
Options:
The parameter is used to specify the text that is displayed for value 0.
The length of the text is limited to 60 characters.
Text for value 1:
Options:
The parameter is used to specify the text that is displayed for value 1.
The length of the text is limited to 60 characters.
– 1-byte value [0 - 255]: A status value is sent as 1-byte value without a sign. The following
supplementary parameters are available:
Product manual 2CKA001473B5023
Control elements and application parameter
1 column
2 columns
1 bit
1-byte value [0 - 255]
<Text>
<Text>
"Display" control element
│90