ABB IP Touch 7 Manual page 56

Sent value 1 / value 2 [0 - 255]:
Options:
– 1-byte value [-128 - 127]: A value is sent as 1-byte value with a sign, e.g. a actuating value.
The following supplementary parameter is available:
Sent value 1 / value 2 [-128 - 127]:
Options:
– Scene number: The parameter is used to select a 1-byte object to link it with a scene
number. Values between 1 and 64 are available for light scene numbers. The following
supplementary parameter is available:
Transmitted value 1 / value 2 [scene number]:
Options:
– 0 - 64: Entry of scene number.
– Calling up or storing scenes: The parameter is used to specify whether the scene is
called up or stored (the scene number is sent with the additional information that the
scene is to be stored).
– RTC operating mode: After actuating the control element the device switches to the
parameterized operating mode. The following supplementary parameter is available:
Sent value 1 / value 2 [RTC operating mode]:
Options:
– Temperature: After the control element is actuated, the device sends the parameterized
temperature value. The following supplementary parameter is available:
Transmitted value 1 / value 2 [temperature]:
Options:
– 2-byte value [-32768 - +32767]: A value is sent as 2-byte value with a sign, e.g. an actuating
value or a time difference. The following supplementary parameter is available:
Sent value 1 / value 2 [-32768 - 32767]:
Options:
– 2-byte value [0 - 65535]: A value is sent as 2-byte value without a sign, e.g. an actuating
value or a time interval. The following supplementary parameter is available:
Sent value 1 / value 2 [0 - 65535]:
Options:
– 2-byte floating point: A value is sent as 2-byte floating point value, e.g. a temperature value,
a time duration, a performance or a consumption value. The following supplementary
parameter is available:
Product manual 2CKA001473B5023
Control elements and application parameter
Setting option from 0 - 255
Setting option from -128 - +127
Setting option from 0 - 64
Calling up or storing scenes
Auto
Comfort
Standby
ECO
Frost/heat protection
Setting option from 16 - 31
Setting option from -32768 - +32767
Setting option from 0 - 65535
Control element "Rocker switch"
│56