ABB IP Touch 7 Manual page 47

– Object type value 1: When actuated (pressing) the control element sends telegrams via
the associated communication object. This parameter is used to specify the size of the
communication object.
– Object type value 2: When actuated (releasing) the control element sends telegrams via
the associated communication object. This parameter is used to specify the size of the
communication object.
– Short/long: Short press = value 1; long press = value 2.
The following supplementary parameters are available, see chapter 2.1.5 "Object type 1 /
value 2" on page 48:
– Long operation after...:
Options:
The parameter is used to specify how long the button must be pressed to recognize a
long operation.
– Object type value 1: When actuated (short press) the control element sends telegrams
via the associated communication object. This parameter is used to specify the size of
the communication object.
– Object type value 2: When actuated (long press) the control element sends telegrams
via the associated communication object. This parameter is used to specify the size of
the communication object.
Product manual 2CKA001473B5023
Control elements and application parameter
Setting option from 0.3 - 10 seconds
"Switch" control element
│47