General - Send Cyclic "In Operation" (Min); General - Additional Functions/Objects; General - Delay Time For Read Telegrams After Reset [S] - ABB IP Touch 7 Manual

2.21.4 General — Send cyclic "In operation" (min)
Options:
– Communication object "In operation" serves for the information that the controller still
operates. Value "1" is sent cyclic. The cycle for sending is set via this parameter. If there is
no cyclic telegram, the function of the device is disturbed and the air-conditioning of the
room can be maintained via forced control. For this, however, the system and/or actuator
must have the "Forced control" function.
2.21.5

General - Additional functions/objects

Options:
– This parameter enables additional functions and communication objects.
2.21.6 General — Delay time for read telegrams after reset [s]
Options:
– This parameter can be used to receive telegrams via the "Input" object. The received
telegrams are sent with the set delay time to the "Output" object after a reset.
Note
This parameter is only available if the "Additional function" parameter is set to
"Yes".
Product manual 2CKA001473B5023
Control elements and application parameter
Setting option between 5 - 3000 minutes
Deactivated
Activated
Setting option from 1 - 255 seconds
Application "Internal RTC"
│141