ABB IP Touch 7 Manual page 219

The following areas become available:
Display
Cleaning blockage
Sound
Time and date
Screensaver
PIN code
Product manual 2CKA001473B5023
Function
Setting the brightness of the display via the slider.
■
■
■
Fixing the volume for the following sounds.
■
– Click sound
– Warning sound
– Fault sound
Also a selection of sounds for different types of messages ca be made.
■
If a micro SD card (SDHC) with suitable sound files is in the device,
■
select a different sound from the card via the drop-down menu. The
sound files should have format "mp3". Also wave files can be used.
Notice
The card must remain inserted in the device for this
function!
Different time and date settings:
■
– Time
– Time zone
– Date
– Start of week
Different settings for the specified screen saver.
■
– The default setting is the display as digital clock.
– If a micro SD card (SDHC) with suitable pictures is in the device, select
a screen saver via the drop-down menu. If there are several pictures on
the micro SD card (SDHC), they are displayed as a slide show.
Slide show (electronic picture frame)
■
– With the commissioning tool you can set how long each picture is
displayed.
Picture requirements:
■
– The pictures must be stored on the micro SD card (SDHC) on the first
level in the "Picture" directory.
– The maximum permissible size of a picture is 3 MB.
The supported format is "*.jpg".
■
If it was specified in the commissioning software that the end user can
■
change the PIN code directly on the device, this page becomes visible.
– Here the PIN code levels can be specified and adjusted.
To ensure that no function is triggered
unintentionally during cleaning of the device, the
control elements can be disabled for a certain time.
The cleaning blockage is activated with a press of
the button. It is automatically deactivated after 30
seconds.
Operation
│219