Display Value In Control Element - ABB IP Touch 7 Manual

2.4.8

Display value in control element

Options:
The parameter is used to specify whether the dimming value is displayed in the control element.
– No: No display. No additional parameters available.
– Yes: The following parameters are displayed:
Status of dimming value is controlled by a separate object:
Options:
The brightness value signalled by the dimmer slider can be displayed via a separate object.
An additional 1-bit communication object "Status value" is enabled. The displayed value
does not originate from the control element. The value is received via a separate feedback
object.
Unit:
Options:
The parameter is used to enter the unit or the unit sign with which the value is displayed in
the control element.
The length of the text is limited to 20 characters.
Product manual 2CKA001473B5023
Control elements and application parameter
Deactivated
Activated
Deactivated
Activated
<Text>
Control element: "Dimmer slider"
│66