Creation Of The Navigation Structure; Creating Operating Pages (Start - ABB IP Touch 7 Manual

Commissioning of the KNX Function via DCA (from ETS5)
1.7

Creation of the navigation structure

The panel contains operating pages (start pages) for operating the IP touch. These pages must
be created beforehand. Generally a main start page is created (see chapter 1.4 "Explanation of
the basic structure (Terms)" on page 20).
A total of 8 operating pages can be created. The number of the created pages is displayed in
the bottom part of the library area.
1.7.1 Creating operating pages (start pages)
1. Open the "Navigation" tab in the library area.
2. Click on the arrow to the left of the device details.
3. Click on the arrow to the left of "Start pages".
– The main operating page is displayed as standard (marked with a star).
4. Click on the main operating page to display it in the work area.
5. To add additional operating pages, in the tree structure of the library area click on the plus
icon on the right next to "Add page".
– The next page is displayed in the work area and in the tree structure.
All created operating pages of a floor can be displayed in the work area by clicking on "Start
pages" in the tree structure. Then one can "swipe" in the work area as on the panel. This is
done via the arrows.
A total of 7 operating pages (start pages) can be created in addition to the main operating page
(marked with a star). The number of the created pages is displayed in the bottom part of the
library area.
Product manual 2CKA001473B5023
Notice
Operating pages can also be added by clicking on "Start pages" in the tree
structure. A further page is then displayed with a plus icon in the work area.
When you click on this page, a further page is added and displayed in the
tree structure.
│26