Operation; Operating Conditions; Safety; Overview - ABB ACS5000 User Manual

8. Operation

8.1. Operating conditions

The operating conditions for the drive are according to IEC 60721-3-3.
– Classification: 3K22 / 3B1 / 3S6 / 3M11

8.2. Safety

WARNING
Risk of electric shock The IPXXB/IP20 rating of the low voltage compartment is not
fulfilled by live parts with voltages > 50 V AC. If the compartment door is open during
drive operation, contact with these accessible live parts can result in DEATH or serious
injury!
→ Drive system must ONLY be operated by qualified and authorized personnel who
are familiar with the operation of the drive system and the hazards involved

8.3. Overview

This chapter outlines the local operation of the drive.
Control of the drive via a PLC or higher-level control system is not described in this chapter. If
the drive is controlled from remote, see the applicable manuals for information.
The status messages and parameter settings used in this chapter are typical examples to
illustrate the related instructions and display functions and may therefore differ from the actual
status messages and parameter settings in the drive.
PRODUCT
ACS5000W gen. 2
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS799208 E01
OPERATION
REV. LANG. PAGE
J en 122/186