Storage; Storage Conditions; Storing A Drive - ABB ACS5000 User Manual

4.6. Storage

The drive can be stored for up to one year in the original packaging as long as it is not damaged
or opened. For information on longer storage periods, contact ABB.

4.6.1. Storage conditions

The minimum requirements for storage are based on IEC 60721-3-1.
– Classification: 1K22 / 1B1 / 1C2 / 1S11 / 1M11

4.6.2. Storing a drive

If the drive is taken out of service for a longer time proceed as follows:
1. Drain the cooling circuit completely or add the appropriate amount of glycol for frost
proofing if the drive is to be stored in ambient temperatures below 0 °C.
For information about draining and frost proofing, see the manual of the water cooling unit
in "Appendix A – Additional manuals".
2. Cover all cable inlets and ventilation slots with an impermeable plastic or aluminum foil and
a wooden panel.
3. Add a desiccant of the appropriate quality:
• One unit desiccant (30 g) absorbs 6 g water vapor
• When using a polyethylene foil: 10 units/m
4. Close and lock the doors of the drive.
5. Use polyethylene or equivalent for packaging:
2
• 0.3 g/m /24 h water vapor diffusion
6. Attach humidity indicators to the packaging.
NOTICE Check storage and packaging conditions regularly. Repair damage immediately.
PRODUCT
ACS5000W gen. 2
DOCUMENT KIND
User manual
TRANSPORTATION, STORAGE, AND DISPOSAL
2
foil
DOCUMENT ID.
3BHS799208 E01
REV. LANG. PAGE
J en 64/186