9.2.2. Actual signals mode
1
2
3
4
Key:
(1)
Display
(2)
Actual signal names and values
(3)
Selection key for actual signals mode
(4)
Fast navigation key for selecting the actual
signals display or the fault memory display
Fig. 92. Control panel functions for Actual signals mode
9.2.2.1. Overview
Two displays can be selected in the actual signals mode:
–
Actual signals display
–
Fault memory display
The actual signals display appears first when entering the actual signals mode. However, when
the drive is in a fault condition, the fault memory display appears instead.
The actual signals display is used to monitor the drive without interfering with its operation. It
continuously displays three selectable actual values.
If a key is not actuated within one minute (an exception from this is the fault memory display),
the CDP control panel automatically returns to the actual signals display from other modes.
PRODUCT
ACS5000W gen. 2
5
6
DOCUMENT KIND
User manual
(5)
Slow navigation key for selecting signals or
fault messages
(6)
Enter key for confirming the selection
DOCUMENT ID.
3BHS799208 E01
CDP CONTROL PANEL
REV.
LANG.
PAGE
J
en
141/186