Energizing The Drive; Stopping The Motor - ABB ACS5000 User Manual

10.6.2. De-energizing the drive
The following section describes how to de-energize the drive using the local operator panel of
the drive. If the drive is controlled from remote, follow the established shutdown procedures.
For instructions on how to use the CDP control panel, see Chapter 9, "CDP control panel",
page 138.

10.6.2.1. Stopping the motor

1. Enable the local control mode of the CDP control panel.
2. To stop the motor, press the STOP key.
When the motor has reached zero speed, the display shows ReadyRun.
1 L -> 600.0 rpm 0
StateINU ReadyRun
MOTOR SP 0.00 rpm
POWER 0.0 kW
10.6.2.2. De-energizing the drive
1. To disconnect the drive from the main power supply, press the SUPPLY OFF push button.
The following takes place:
• Main circuit breaker (MCB) opens
PRODUCT
ACS5000W gen. 2
DOCUMENT KIND
User manual
PREVENTIVE AND CORRECTIVE MAINTENANCE
DOCUMENT ID.
3BHS799208 E01
REV. LANG. PAGE
J en 169/186