ABB ACS5000 User Manual page 26

6) Protect against adjacent live parts and take special precautions when close to bare
conductors.
• Determine minimum approach distances, apply screening or shrouding, and when
applicable, padlock both cable and busbar shutters.
• If working within the restricted approach boundary or vicinity zone where inadvertent
movement could cause contact with live parts, special precautions must be employed,
such as the use of the properly rated insulated gloves and tools.
7) Complete the permit to work and "Walk the Permit".
• Check isolation points
• Verify that all circuits are isolated and secured
• Ensure all parties are integrated with the Lockout/Tagout
• Check the earths are properly applied
• Answer specific questions from the working group
• Ensure the work can proceed without danger
• Complete and verify the "Permit to Work"
PRODUCT
ACS5000W gen. 2
DOCUMENT KIND
User manual
IMPORTANT SAFETY INFORMATION
DOCUMENT ID.
3BHS799208 E01
REV. LANG. PAGE
J en 26/186