Overview - ABB ACS5000 User Manual

9.2.3.1. Overview

If the parameter lock is disabled or unlocked (see Section 9.2.3.3, "Enabling / unlocking a
parameter lock", page 152) the parameters mode allows entering the parameter settings for the
required drive configuration depending on the application.
The parameters are organized in functional groups, so called parameter groups.
Group Description
Group 07 Control words
Group 08 Status words
Group 09 Fault and alarm words
Start, stop, direction or MCB
Group 11
control
Group 12 Reference selection
Group 16 System control inputs
Group 17 DC link control
Group 18 Utility
Group 19 Data storage
Group 20 Limits
Group 21 Start / stop / process stop
Group 22 Ramp functions
Group 23 Speed reference
For details about the parameters, their settings and functions, see "Appendix G – Signal and
parameter table".
When entering the parameters mode for the first time after the auxiliary supply voltage of the
drive has been switched on, the CDP control panel displays the first parameter of parameter
group 11. The next time the parameters mode is entered, the previously selected
parameter displays.
Some parameter settings cannot be changed while the drive is running. If tried, the following
warning displays.
** WARNING **
WRITE ACCESS DENIED
PARAMETER SETTING
NOT POSSIBLE
PRODUCT
ACS5000W gen. 2
DOCUMENT KIND
User manual
Parameter Description
21.01
Start function
21.02
Start function
21.03
Off1 stop mode
21.04
Process stop selection
21.05
Process stop signal
21.06
Process stop MCB control
21.07
Process stop mode
.
.
.
21.17
MCB closing time limit
.
21.19
MCB available signal
DOCUMENT ID.
3BHS799208 E01
CDP CONTROL PANEL
REV. LANG. PAGE
J en 149/186