5.8. Applying silicone
Silicone prevents water from entering the gap between two joining roof plates. Apply silicone
where two transport units have been joined (Fig. 37). Gaps within a transport unit are factory-
sealed.
Fig. 37. Applying silicone
5.9. Installing roof joints
Install the roof joints across shipping splits at the following locations:
–
Marine drives: at the front of the roof (the back is reserved for roof attachments, see
Section 5.11, "Installing roof attachments on marine drives", page 78.)
–
Standard drives: at the front and the back of the roof
For the exact number and fitting location of roof joints, see "Appendix C –
Mechanical drawings".
TABLE 4 Installation material per roof joint
Items
Connecting piece
Hex-head bolt
Washer
Fig. 38. Roof joint
PRODUCT
ACS5000W gen. 2
Details
8 × 80 × 220 mm
M16 × 40
17 × 30 × 3
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS799208 E01
MECHANICAL INSTALLATION
ID Number
3BHB011552R0001
NB 312350P0464
9ABA450078P0008
REV.
LANG.
PAGE
J
en
72/186