5.4. Dimensions and clearances
For information on dimensions, location and size of fixing holes and clearances, see
"Appendix C – Mechanical drawings".
5.4.1. Rear and top access to the cabinet
Joining the transport units and DC busbars requires rear and top access.
5.4.2. Cabinet roof
The cabinet roof is not designed as a base for foreign devices or cable ducts. Therefore, do not
install any foreign objects on the roof.
5.4.3. Fire protection
To prevent fire from spreading into the drive, apply suitable fire protection measures.
5.4.4. Cable duct material
Use cable ducts of non-flammable material with non-abrasive surface.
To prevent dust, humidity and animals from entering the drive, protect all cable entries and
exits of cable ducts.
5.4.5. Installation material
Installation material is supplied with the drive in a separate box.
5.4.6. Tools
See Section 1.10, "Tools", page 20.
PRODUCT
ACS5000W gen. 2
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS799208 E01
MECHANICAL INSTALLATION
REV.
LANG.
PAGE
J
en
67/186