Fig. 77. Cable routing in COU cabinet
6.8.2.2.2. Control power supply
–
Connect the cable for the control power to terminal X2 (11, Fig. 76).
6.8.2.2.3. Control signals
–
Connect the cables to the following terminals:
•
X10, X11 (10, Fig. 76) Main circuit breaker signals and emergency off signals
•
X20 to X27 (7, Fig. 76) Control signals of monitored equipment
6.8.2.2.4. Fieldbus interface
–
Connect the cable directly to the fieldbus adapter.
6.8.2.2.5. Encoder interface
1. Connect the cable directly to the encoder adapter.
2. Connect the overall shield and the individual shields of the encoder cable to the
copper busbar.
NOTICE DO NOT connect the shields directly to the encoder adapter.
PRODUCT
ACS5000W gen. 2
1
2
DOCUMENT KIND
User manual
Key:
(1)
Top cable entry
(2)
Bottom cable entry
DOCUMENT ID.
3BHS799208 E01
ELECTRICAL INSTALLATION
REV.
LANG.
PAGE
J
en
112/186