4. Transportation, storage, and disposal
4.1. Safety
The drive must only be handled by personnel who are skilled and experienced in
unpacking and transporting heavy equipment
4.2. Transport conditions
The transport conditions for the drive are based on IEC 60721-3-2.
–
Classification: 2K12 / 2B1 / 2C2 / 2S5 / 2M4
4.3. Unpacking and inspection
1. Carefully remove all packaging material.
2. Inspect the drive and accompanying equipment and make note of any damage.
•
Take a photograph of the damage and inform ABB and the shipping company
immediately.
3. Compare the complete delivery with the purchase order and the packing list.
•
If parts are missing, contact the shipping company and ABB immediately
4.4. Identifying drive units
A delivery can consist of transport units for several drives. To identify the transport units and
assign them to a particular drive, see the following accompanying papers for information:
–
Packing list, attached to the packaging of each transport unit
–
Packing label on the back wall of each drive unit (PCU, COU, WCU). The packing label is only
visible after the packaging has been removed.
PRODUCT
ACS5000W gen. 2
DOCUMENT KIND
User manual
TRANSPORTATION, STORAGE, AND DISPOSAL
DOCUMENT ID.
3BHS799208 E01
REV.
LANG.
PAGE
J
en
56/186