2.3.3. Possible residual risks
Residual risks must be considered by the drive system integrator and/or plant owner when
assessing the hazards of the equipment to personnel. The following risks can pose a hazard to
drive system personnel:
1) Electric power equipment generates electro-magnetic fields which can cause a hazard to
people with metal implants and / or a pacemaker.
2) Drive system components can move unintentionally when being commissioned,
operated, or serviced due to:
•
Operation of the equipment outside the scope of the specifications
•
Incorrectly assembled or installed equipment
•
Wrongly connected cables
•
External influence on, or damage of the equipment
•
Wrong parameter settings
•
Software errors
•
Faulty hardware
3) Hazardous touch voltages can be present on drive system components, which can be
caused by:
•
Operation of the equipment outside the scope of the specifications
•
External influence on, or damage of the equipment
•
Induced voltages by external equipment
•
Condensation on equipment components, or pollution
•
Faulty hardware
4) High temperatures, noise, particles, or gases can be emitted from drive system
components caused by:
•
Operation of the equipment outside the scope of the specifications
•
External influence on or damage of the equipment
•
Incorrect parameter settings
•
Software errors
•
Faulty hardware
5) Hazardous substances can be emitted from drive system components due to incorrect
disposal of components
PRODUCT
ACS5000W gen. 2
DOCUMENT KIND
User manual
IMPORTANT SAFETY INFORMATION
DOCUMENT ID.
3BHS799208 E01
REV.
LANG.
PAGE
J
en
27/186