Customer Interface; S800 I/O System; Fig. 19. Cou Customer Interface Section - ABB ACS5000 User Manual

3.4.2.7. Customer interface

The devices present in the customer interface depend on the options ordered, such as:
– Serial communications interface to a higher-level control system
– The modules of the S800 I/O system for monitoring of external equipment, such as
transformer and motor
– DriveMonitor
2
Key:
(1) Arc Guard System™
(2) Remote condition monitoring NETA-21 and
fieldbus interface
(3) Customer terminals
(4) S800 I/O process system (customer- specific
configuration)

Fig. 19. COU customer interface section

3.4.2.8. S800 I/O system

The S800 I/O station with digital and analog I/O interfaces transfers drive-related hardwired
signals to the AMC circuit board.
Standard ABB Advant S800 I/O modules interconnect internal and external digital and analog
I/O signals with the control system of the drive. The I/O station consists of a bus modem
serving as an interface to the AMC circuit board and the I/O modules. Each I/O module is
plugged into a termination unit that is wired to separate terminals to which the external signals
are connected.
PRODUCT
ACS5000W gen. 2
1
3
DOCUMENT KIND
User manual
POWER ELECTRONICS AND CABINET FEATURES
4
7
(5) Grey encoder (optional)
(6) NTAC-02 pulse encoder (optional)
(7) Customer terminals
DOCUMENT ID.
3BHS799208 E01
5
6
REV. LANG. PAGE
J en 46/186