ABB ACS5000 User Manual page 140

After 2 to 3 seconds the display shows the drive name (1 and 2), the application software in use
(3), and the drive identification (4) is displayed.
1
ACS5000 xxxx
2
<Device Name>
3
LXHH44xx
4
ID-NUMBER 1
After another few seconds.
1 L -> 0.0 rpm
StateINU InitSeq....
MOTOR SP 0.00 rpm
POWER 0.0 kW
After another few seconds, the display changes to the actual signals display. The status line of
the display alternates between
1 L -> 0.0 rpm
StateINU DCGndNopen
MOTOR SP 0.00 rpm
POWER 0.0 kW
PRODUCT
ACS5000W gen. 2
DCGndNOpen and NotReadyOn.
Alternating display message:
– DCGndNopen
– NotReadyOn
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS799208 E01
CDP CONTROL PANEL
REV. LANG. PAGE
J en 140/186