About The Arm720T Processor - Epson ARM720T Core Cpu Manual

1
Introduction
This chapter provides an introduction to the ARM720T processor. It contains the following
sections:
1.1

About the ARM720T processor .................................................................. 1-1

1.2 Coprocessors ............................................................................................... 1-5
1.3 About the instruction set ........................................................................... 1-5
1.4 Silicon revisions........................................................................................ 1-18
1.1 About the ARM720T processor
The ARM720T processor is a general-purpose 32-bit microprocessor with 8KB cache, enlarged
Memory Management Unit
write buffer, and
processor uses the ARM7TDMI-S CPU, and is software-compatible with the ARM processor
family.
The on-chip mixed data and instruction cache, together with the write buffer, substantially
raise the average execution speed and reduce the average amount of memory bandwidth
required by the processor. This enables the external memory to support additional processors
Direct Memory Access
or
The MMU supports a conventional two-level page table structure and several extensions that
make it ideal for running high-end embedded applications and sophisticated operating
systems.
The allocation of virtual addresses with different task IDs improves performance in task
switching operations with the cache enabled. These relocated virtual addresses are monitored
by the EmbeddedICE-RT block.
The memory interface enables the performance potential to be realized without incurring high
costs in the memory system. Speed-critical control signals are pipelined to allow system
control functions to be implemented in standard low-power logic. These control signals permit
the exploitation of paged mode access offered by industry-standard DRAMs.
The ARM720T processor is provided with an
brings out the required signals from the ARM core to the periphery of the ARM720T processor.
This enables you to connect a standard ETM7 macrocell.
The ARM720T processor is a fully static part and has been designed to minimize power
requirements. This makes it ideal for portable applications where low power consumption is
essential.
The ARM720T processor architecture is based on
principles. The instruction set and related decode mechanism are greatly simplified compared
with microprogrammed
ARM720T CORE CPU MANUAL
(MMU) combined in a single chip. The ARM720T
(DMA) channels with minimal performance loss.
Embedded Trace Macrocell
Complex Instruction Set Computers
EPSON
Reduced Instruction Set Computer
(CISCs).
1: Introduction
(ETM) interface that
(RISC)
1-1