Other Boards: Features - Fujitsu PRIMERGY BX600 User Manual

Features

Other Boards: Features

KVM blade The rear KVM blade provides the VGA, PS2 keyboard and
mouse interface in the KVM connector for local administration
of the server blades. To connect these devices a special cable
is required, see
To provide information as to which server blade is connected
to the KVM blade, the KVM blade also has an identify button
and an LED (see
The front control board is included in the server front and
Front control
board contains front indicators and controls. It also contains an
identify button and LED on the server front that indicates if the
system has been selected for identification or remote adminis-
tration (see
The power distribution board is the bridge that provides inter-
Power distri-
bution board connection between the redundant power supply units and the
midplane. It divides up the 12 V output into 10 branches for
(PDB)
server blades and 6 branches for management blades and switch
blades and FC pass-thru blades.
The midplane board provides internal interconnection between
Midplane
board all BX600 blade boards.
The docking board connects the front control board (containing
Docking
indicators and controls on the front bezel) to the midplane (see
board
page
Power supply
Up to four hot-swappable power supply units which adjust automatically to any
power voltage in the range 100 V - 127V or 200 V - 240 V in a 3+1 redundant
power supply configuration ensure enough power for the system. If one of these
units fails, the others ensure that operation continues unimpaired. The defective
power supply unit can be replaced during operation (hot-swap).
02 BX600 10
– –
page 02-BX600-27.
page
page 02-BX600-31).
02-BX600-131).
March 2006
02-BX600-31).
General information
U41057-J21-Z146-1-76