Fujitsu PRIMERGY BX600 User Manual page 14

Product designations
Product
02 BX600 14
– –
Base units
2 hot-plug power supplies 1200W at 230V (850W at 110V)
All redundant hot-plug fans on the rear
– 2 fan modules with 2 fans each (2+2 redundancy) and 3
fans in every power supply
Drives / bays / slots
– 10 empty slots for hot-plug dual server blades in the front
– 1 empty slot for hot-plug Gbit Ethernet switch blade in the
rear
– 2 empty slots for Fibre Channel pass-thru blades in the
rear
– 2 empty slots for additional hot-plug PSUs in the rear
2 management blades
External SCSI module with 2 VHDCI68 connectors (UHD68)
KVM switch (keyboard, video and mouse switch)
1 Gbit Ethernet switch blade
External interfaces:
– 1x RS-232-C (serial, 9-pin) per management blade (2 total)
– 1x LAN RJ45 per management blade (2 total)
– 3x LAN RJ45 per Gbit Ethernet switch blade (max. 6 total)
– 10x FC per Fibre Channel pass-thru blade (max. 20 total)
– 2x SCSI UHD connectors
– 1x keyboard (PS/2) on the KVM switch
– 1x mouse (PS/2) on the KVM switch
– 1x VGA (15 pin) on the KVM switch
– 1x VGA and 2x USB 1.1 in the front of each server blade via
special cable
Cables:
– 1x special cable with 2x USB for external CD/FD and 1x
VGA for server blade front connection.
– 1x special cable with 2x PS/2 and 1x VGA for KVM switch
– 2x power cable for internal rack connection
Software:
– ServerStart (for remote installation)
– ServerView (for blade server monitoring)
– RemoteView FrontEnd (for remote management) on CD
March 2006
General information
via special cable
U41057-J21-Z146-1-76