The Control And Connection Panel - Fujitsu PRIMERGY BX600 User Manual

Settings

The control and connection panel

The connection panel of the switch blade can be accessed on the server rear.
1
2
3
4
The following indicator and connection elements are available:
1 3x uplink LAN connectors (with two integrated LAN status LEDs each (see next
positions 3 and 4))
2 Failure indicator (amber LED)
Unlit:
Lights amber:
Blinks amber:
3 LAN active indicator (amber LED)
Lights amber:
Blinks amber:
4 LAN link indicator (green LED)
Lights green:
Blinks green:
02 BX600 44
– –
The switch blade is OK. System is switched OFF.
The switch blade has failed.
The switch is selected for identification via CLI.
The LAN is active.
This LAN port is directly controlled by via the management
blade user interface.
The LAN is linked.
This LAN port is directly controlled by via the management
blade user interface.
March 2006
Installation and initial operation
U41057-J21-Z146-1-76